free amp templates

12v Luton Van Loading Area Lighting Set

This 12v DC LED Light Set is designed for the owners of Luton & Large Box Vans.

Clear illumination for the Loading area.
Compact with excellent light output from 75 Samsung LEDs
Very low power consumption, Only 2.5 amps
Produces very little heat,  Water resistant connectors. Easy to install
1 year Warranty.

Please Note; This kit is a universal fit what ever the make of your van, be it a Ford Transit, Renault, Vauxhall, Citroen, Peugeot, Mercedes Sprinter or a VW
our LED Lighting Set will fit most of them.


Thank you for looking at or 12v LED Luton Interior Van Loading Lighting Kit.
With it huge 4500 lumen output this kit will allow you to significantly increase visibility in the loading area of your van.

Each of the Super Bright Samsung 5630 LED Modules used in our sets are Dust and Waterproof to IP65. They are also CE and RoHS compliant.

To provide superior reliability our LED Modules are manufactured pre-wired together in a huge 3500mm string with an additional 15 LEDs in an 860mm string for the tail lift/entry area. The Pure White LEDs are set to 6000-7000K and provide clear crisp illumination.

The Kit contains:
25 Super Bright Samsung Injection Moulded LED Modules.
10 meters of Twin Core Wire.
Water Resistant Jelly Connectors
Scotchlock Style Connectors
Pre-fitted Terminal Connectors
Inline Rocker Switch
Cable Tidy Clips
Double Sided Sticky Pads
Eay Instal Festoon Connector - Already Fitted
Full Step by Step Instructions

Our Lighting Set can be installed in as little as 20 minutes.


Our Samsung LED Lights draw very little power, only approx 0.1 amps per module.   The highly efficient LED’s convert almost all of the power they use into light and very little heat, allowing the LED Lights to be located in virtually any position. Including a refrigerated vehicle. 

In total they produce around 4500 lumen of light, which is about the same as 2 x 100W 240v incandescent bulbs.
Each bank contains 3 LEDs which are effectively tiny spot lights covered with a lens so the light is directed where you want it and not wasted.
The 20 individual modules on the main string are spaced out over about 3600mm of cable making them easy to fit using either the double sided sticky pads supplied or the handy fixing hole on each module. The second string of 5 modules provides additional light in the tail lift / entry area. 
 
With the lighting colour set at around 6000-7000K our LED Van Lighting Set provides clear crisp illumination, and with a life expectancy measured in the tens of thousand of hours they could last you a lifetime.

The capacity of our cabling has been carefully matched to the power requirements of the LEDs. The multi-strand cable provides durability against vibration while remaining incredibly flexible. It avoids loss of current and therefore possible reductions in light output from the LEDs. 
The handy red and black polarity colouring also assists with the ease of installation. 
The Lighting Set has been deigned to be as easy to fit as possible; 
Powered from an existing courtesy light using the Easy-Fit Festoon Adaptor or wired directly into your vehicles wiring loom. 
The 25 LED Modules are pre-wired together and are already fitted with double sided sticky pads and the Terminal Connectors. 
The Festoon Adaptor is also pre-wired to the Twin Core Cable. 
The waterproof connectors have a twin self-splicing mechanism and only need a squeeze with a pair of pliers. 
The Inline Rocker Switch has just six screws and two wires to connect. 
The Scotchlock Connectors for the wiring loom option are also a squeeze fit.

Each of our LED Lighting Kits has its own unique serial number. this allows us to tell which components from which supplier and from which individual delivery were used. When the Kit was packed and who assembled it.

Please Note; BASIC Wiring knowledge required.

SHARE THIS PAGE!

Copyright 2019 LED Lighting and Leisure Ltd - All Rights Reserved.
Company Number 8534104 Registered in England and Wales.