Thank you for looking at or 12v LED Caravan Lighting Conversion Kit.
This Kit will allow you to convert the tubes in your existing fittings to bright low power LEDs.
Each of the Super Bright LED Modules used in our sets are Dust and Waterproof to IP65. They are also CE and RoHS compliant.
Our LED Lights draw very little power, only 0.06 amps per module. A full set of lights will draw only 0.6 amps, much less than the tubes they replace.
In total they produce approximately the same amount of light as a 50w 240v incandescent light bulb.
Each of the LED modules is 83mm long, 15mm wide and 6mm thick. The wire between each module is 83mm long.
The example lighting unit we show in the picture is from Labcraft. The overall dimensions of which are 390mm x 120mm with a 330mm x 70mm lens.
The flexible wire will allow you to intall the LEDs in most florescent tube fittings.
The Pure White LEDs are set to 7000-8000K and provide clear crisp illumination.
The Kit contains:
10 Super Bright Injection Moulded LED Modules.
1 meter of spare Twin Core Wire.
Water Resistant Jelly Connectors
Scotchlock Style Connectors
Pre-fitted Terminal Connectors
Full Step by Step Instructions with Photos.
The Lighting Set is as easy to fit as possible. The 10 LED Modules come pre-wired together and are fitted with double sided sticky pads.
The Modules can be positioned to fit most florescent light fitting before final fixing. The waterproof connectors only need a squeeze with a pair of pliers. The Scothlock style connectors are also a squeeze fit. Spare wire is included if you should need it.
Each of our LED Lighting Kits has its own unique serial number. this allows us to tell which components from which supplier and from which individual delivery were used. When the Kit was packed and who assembled it.
This listing is for the Conversion Kit ONLY and does not include the origional light fitting.
BASIC Wiring knowledge required.