Thank you for looking at or 12v 30 LED Awning Lighting Kit.
It is a compact set with excellent light output from its 30 SMD LEDs, which are pre-wired together in a 1700mm string.
Each of the Super Bright LED Modules used in our sets are Dust and Waterproof to IP65. They are also CE and RoHS compliant.
Our LED Lights draw very little power, only 0.06 amps per module. A full set of lights will draw only 0.6 amps,
they generate virtually no heat, have water proof connectors and are easy to install.
In total they produce approximately the same amount of light as a 50w 240v incandescent light bulb.
This makes them absolutely ideal if you are wild camping or relying on battery power alone.
The Kit contains:
10 Super Bright Injection Moulded LED Modules.
6 meters of Twin Core Wire.
Water Resistant Jelly Connectors
Pre-fitted Terminal Connectors
In-line Rocker Switch
Full Step by Step Instructions with Photos.
The only extra you will need is a suitable 12v plug for your van or connectors and a 2amp fuse if you are using a stand alone battery.
Each of the LED modules is 83mm long, 15mm wide and 6mm thick. The wire between each module is 83mm long.
Maintenance Free and Injection Moulded in milky white PVC, the LED Lights have a working temperature reange of -20 to +60 Deg C.
Each Module contains 3LEDs which are effectively tiny spot lights so the light is directed where you want it and not wasted.
The Pure White LEDs are set to 7000-8000K and provide clear crisp illumination.
The 10 individual modules are spaced out over about 1700mm of durable twin core cable making them tidy in appearance and easy to fit using either the fitted double sided sticky pads made by 3M or the handy fixing hole on each module (we do not recomend sticking the modules directly to your awning material). With a life expectancy measured at over ten thousand hours they could last you a life time.
The Lighting Set is as easy fit as possible. No detailed wiring knowledge is required. The 10 LED Modules come pre-wired together and are fitted with double sided sticky pads. The waterproof connectors only need a squeeze with a pair of pliers. The in-line rocker switch is probably the hardest part of the installation with 6 screws and two wires to connect. Knowing that space can be at a premium when camping, the tough plastic pack your lights are supplied in can be re-used and is only about the size of a pre-packed sandwich.
Each of our LED Lighting Kits has its own unique serial number. this allows us to tell which components from which supplier and from which individual delivery were used. When the Kit was packed and who assembled it.
BASIC Wiring knowledge required.